CVD synthesis of carbon nanostructures and their applications as supports in catalysis : selective hydrogenation of cinnamaldehyde over Pt-Ru bimetallic catalysts, Electrocatalysts for electrodes in polyelectrolyte membrane fuel cells / Teddy, Jacques  

Public ISBD Titre : CVD synthesis of carbon nanostructures and their applications as supports in catalysis : selective hydrogenation of cinnamaldehyde over Pt-Ru bimetallic catalysts, Electrocatalysts for electrodes in polyelectrolyte membrane fuel cells Type de document : texte imprimé Auteurs : Teddy, Jacques ; Philippe Serp, Directeur de thèse Année de publication : 2009 Langues : Français (fre) Résumé : In this work, we describe the synthesis, structure, physical properties and some applications in catalysis of previously known carbon allotropes, and recently discovered carbon nanostructure (Chapter I). First, FB-OM-CVD deposition was used for metal or metal oxide deposition on metal oxide supports like alumina or silica, leading to the production of supported catalysts. The resulting material was used as catalyst for catalytic chemical vapor deposition of carbonaceous nanostructures i.e single- and multi-walled carbon nanotubes (SWCNTs, MWCNTs), carbon nanofibers (CNFs), and nitrogen doped carbon nanotubes (N-MWCNTs) and nanofibers (N-CNFs) (Chapter II). After catalyst removal by a H2SO4 or NaOH treatments and carboxylic surface group generation by a HNO3 treatment in the case of MWCNTs and CNFs, the carbon nanostructures were used as supports for heterogeneous catalysis. The hydrogenation of cinnamaldehyde was used as a model reaction to compare the performance of different bimetallic Pt-Ru catalysts as a function of the nature of the support. Detailed parametric studies as well as the effect of a heat treatment on the performance improvement of the Pt-Ru/MWCNT catalyst are presented. An explanation for the increase of performances upon heat treatment will be proposed after HREM, EDX, EXAFS and WAXS characterization of the catalyst (Chapter III). The prepared carbon nanostructures were also tested as supports for Pd based electrocatalysts for direct alkaline fuel cells applications in both cathodes for the ORR reaction and anodes for alcohols oxidation. Document : Thèse de doctorat Etablissement_delivrance : INPT Date_soutenance : 06/11/2009 Ecole_doctorale : Sciences de la Matière (université Toulouse III P. Sabatier) Domaine : Chimie Organométallique et de Coordination Localisation : LCC En ligne : https://oatao.univ-toulouse.fr/7230/ CVD synthesis of carbon nanostructures and their applications as supports in catalysis : selective hydrogenation of cinnamaldehyde over Pt-Ru bimetallic catalysts, Electrocatalysts for electrodes in polyelectrolyte membrane fuel cells [texte imprimé] / Teddy, Jacques ; Philippe Serp, Directeur de thèse . - 2009. Langues : Français (fre) Résumé : In this work, we describe the synthesis, structure, physical properties and some applications in catalysis of previously known carbon allotropes, and recently discovered carbon nanostructure (Chapter I). First, FB-OM-CVD deposition was used for metal or metal oxide deposition on metal oxide supports like alumina or silica, leading to the production of supported catalysts. The resulting material was used as catalyst for catalytic chemical vapor deposition of carbonaceous nanostructures i.e single- and multi-walled carbon nanotubes (SWCNTs, MWCNTs), carbon nanofibers (CNFs), and nitrogen doped carbon nanotubes (N-MWCNTs) and nanofibers (N-CNFs) (Chapter II). After catalyst removal by a H2SO4 or NaOH treatments and carboxylic surface group generation by a HNO3 treatment in the case of MWCNTs and CNFs, the carbon nanostructures were used as supports for heterogeneous catalysis. The hydrogenation of cinnamaldehyde was used as a model reaction to compare the performance of different bimetallic Pt-Ru catalysts as a function of the nature of the support. Detailed parametric studies as well as the effect of a heat treatment on the performance improvement of the Pt-Ru/MWCNT catalyst are presented. An explanation for the increase of performances upon heat treatment will be proposed after HREM, EDX, EXAFS and WAXS characterization of the catalyst (Chapter III). The prepared carbon nanostructures were also tested as supports for Pd based electrocatalysts for direct alkaline fuel cells applications in both cathodes for the ORR reaction and anodes for alcohols oxidation. Document : Thèse de doctorat Etablissement_delivrance : INPT Date_soutenance : 06/11/2009 Ecole_doctorale : Sciences de la Matière (université Toulouse III P. Sabatier) Domaine : Chimie Organométallique et de Coordination Localisation : LCC En ligne : https://oatao.univ-toulouse.fr/7230/

---

1 (1 - 1 / 1) Par page : 25 50 100 200